ORANGE COUNTY Limited

 

Home | Products | Applications | About Us | Contact Us

 

Brugg PipeSystems General Data Sheet

Brugg Pipe Systems - Efficient Liquid Transport

Brugg Pipesystems manufacture flexible metal core pipe (stainless steel pipe and copper pipe) in 'endless' lengths, core size of pipes range from DN15 (1/2" NB) to DN150 (6" NB). Core pipe is then constructed into a range of finished pipes for different applications, some of which include:

  • Double Wall Metal Safety Pipe, from DN15 (1/2" NB) to DN100 (4" NB)
    - Provides the highest level of environmental protection, with permanent leak monitoring available. Brugg Safety Pipe can be used to transport oil, diesel or petrol through a building whilst maintaining Fire Protection (Pipe in Pipe).
  • Secondary Contained Pipe from DN40 (1 1/2" NB) to DN100 (4" NB)
    - Allows pipework carrying hazardous fluids to be permanently monitored with leak detection, Brugg Secon-X can be directly buried in a trench or run above ground safely.
  • Single Walled Pipe in sized from DN15 (1/2" NB) to DN150 (6" NB) can be directly buried or run above ground. Long lengths can be run without the need for intermediate joints, so making future inspection of joints unnecessary.

Brugg Flexwell Safety Pipes can be manufactured in continuous lengths of over 1,000 metres (depending on size and type of construction). This means that installation times are extremely quick and cost savings are made during installation.

Compared to conventional welded constructions, many kilometres of Brugg Flexwell Safety Pipe can be installed in a few days, saving man power costs and site/ factory downtime. Over 250 kilometres of Brugg flexible metal pipework have been installed on thousands of sites in the UK over the last 12 years.

Listed below are some of the Brugg Pipe Systems which Orange County supply

For more information on Brugg visit the website BRUGG Pipesystems Website


LPG Flexible Stainless Steel LPG Pipe
FLEXWELL® LPG Pipe - Liquid Gas Pipework
Construction: A flexible, endless, single walled, mechanically reinforced pipe system. Carrier pipe: Stainless steel.
System limits: Operating pressure up to 25 bar.
Available sizes: DN 20, 25 and 32 (nom. bore ¾", 1", 1¼" and 1½").
Scope of applications: Transportation of Liquid Petroleum Gas (LPG), predominately liquid feed line and vapour return between LPG storage tanks and the liquid gas dispenser.

Special:Very simple and fast installation without need for welding or radiographic testing. Only simple mechanical connectors at the very ends. Therefore no closure of site/ downtime on refits and minimal loss of site sales.

For more detailed information download the data sheet Brugg Flexwell LPG Data Sheet

 

Secon-X Flexible Stainless Steel Secondary Contained Fuel Pipe
SECON-X® Flexible Petrol Pipework
Construction: A flexible, secondary contained Pipe in Pipe system with leak detection capability. Primary pipe: stainless steel.
System limits: Operating pressure up to 10 bar.
Available sizes: DN40 - DN100. (nom. bore 1½ " - 4").
Scope of applications: Suction pipes, pressure pipes and fill pipes. Transportation of water-pollutant, inflammable, toxic and other dangerous liquids and gases.

Special: Fast and easy installation without welding, using mechanical connectors.

For more detailed information download the data sheet Brugg Secon-X Data Sheet

 

Flexwell FSR Flexible Stainless Steel Double Walled Pipe
FLEXWELL® FSR Safety Pipe in Pipe
Construction: A flexible, double walled, Pipe in Pipe, type-approved, safety pipe system with permanent leak monitoring.
Medium pipe: 316 Stainless steel, copper
with high grade external corrosion protection .
System limits: PN 25.
Dimensions available: DN15 - DN100.
Areas of application: Transport of environmentally hazardous, flammable, toxic, dangerous fuels, liquids and gases.

Special features: Double walled Pipe in Pipe construction with surveillance space for leak monitoring.
Simple and fast laying in continuous lengths, short installation times, no welded connections, no pressure tests needed, no elbow fittings needed.
A tried and tested system of protection for more than 30 years. National approvals (type approval, ...) and also international approvals. Meets the requirements of European Regulations EN 13160 for protective systems of Class I.

For more detailed information download the data sheet Brugg Flexwell FSR Data Sheet

 

Niroflex Flexible Stainless Steel Single Walled Pipe
NIROFLEX® Industrial Pipe System
Construction: A flexible, endless, single walled pipe system.
Medium pipe: 316 stainless steel with and without outer corrosion-proofing.
System limits: PN 16.
Available in dimensions: DN 10 - DN 150.
Areas of application: Transport of gases, water, chemicals. Or as inner liner for an existing pipe system or as protective pipe.

Special features: No welding work required on site, only easily installed mechanical connectors. Laying/ installation of a stainless steel pipe system in long sections.

For more detailed information download the data sheet Brugg NIROFLEX Data Sheet

 

Spiraflex Flexible Stainless Steel Pipe formed into a Heating/ Cooling Element
SPIRAFLEX® Heat exchanger pipe system
Construction: Flexible, endless, spirally corrugated pipe system.
Medium pipe: 316 Stainless steel.
System limits: PN 16.
Available in dimensions: DN 10 - DN 150.
Areas of application: Profiled (spirally corrugated) endless, flexible corrugated pipe for efficient heat transfer in heat exchanger construction, warm water storage, and in the exploitation of regenerative energy sources such as the generation of biogas, solar energy, ....

Special features: Optimum heat transfer, large surface area, high degree of thermal efficiency, easily formable, small bending radii, very economical due to the use of corrosion-resistant materials.

For more detailed information download the data sheet Brugg SPIRAFLEX Data Sheet

 

STAMANT Rigid Steel in Steel Factory Constructed Pipe System
STAMANT® Safety piping
Construction: Rigid, double walled, approved safety piping system with permanent leak monitoring (Pipe in Pipe).
Medium pipe: Steel, stainless steel.
System limits: Operating pressure as appropriate for the plant concerned.
Dimensions available:
DN 15 - 800 (with approvals).
Areas of application: Transport of environmentally hazardous, flammable, toxic, dangerous liquids and gases. Complements FLEXWELL safety piping..

Special features: Double-walled piping construction with surveillance space for die leak monitoring. Double-walled construction elements prefabricated and tested (acceptance test) at our works. With proof of static strength and compensation of longitudinal expansion due to temperature rise. Installation/project planning by specialist firms / plant construction.
Safety piping system with national approvals in Germany (type approval, ...)
Meets the requirements of future European regulations for protective systems of Class I.

For more detailed information download the data sheet Brugg STAMANT Data Sheet

For more information on Brugg visit the Brugg website Brugg Pipesystems Website

© Orange County Limited 2007 | Company No. 2967852
t: +44(0)1388 813433 | f: +44(0)1388 813307